PRODUCT DESCRIPTION
EIOUU · CPD25 · ENCLOSED CABIN
2.5 Ton Electric Forklift with Enclosed Cabin
A protected operator space for daily pallet handling in warehouses, factories and loading areas. The CPD25 combines a 2,500 kg rated capacity with electric drive and a fully enclosed cabin configuration.
| A More Comfortable Place to Work✓ 2,500 kg rated load capacity WhatsApp: +86 13642100567 |
KEY SPECIFICATIONS AT A GLANCE
RATED CAPACITY 2,500 kg | STANDARD LIFT 3,000 mm | DRIVE MOTOR 7.5 kW | OPERATOR SPACE Enclosed cabin |
Designed for Work Between the Warehouse and Loading Area
COMFORT & WEATHER PROTECTION 1. Shelter from Wind and RainThe enclosed cabin helps reduce direct exposure to wind, rainfall and outdoor splashes during trips between storage and loading positions. A roof, glazed sides and closing doors create a more sheltered driving position than an open operator area. The large glazed surfaces let the operator check the surroundings. Keep windows clean and assess blind spots, load visibility and site traffic before each shift. |
|
![]() | CONTROL & DAILY OPERATION 2. Electric Handling with a Protected Driving PositionThe seated operating layout brings steering, travel and hydraulic controls into the operator area. Electric drive avoids tailpipe emissions at the point of use, while the enclosed cabin adds shelter during daily pallet transport and positioning. Heating, air conditioning, ventilation and other cabin equipment can be discussed. Their availability and inclusion must be confirmed for the ordered configuration. |
Choose Cabin Equipment for Your Working Environment
Tell us the operating temperature, indoor and outdoor duty, shift length and visibility requirements. We can review the required cabin options together with the selected truck. An enclosed cabin alone does not establish a waterproof rating, cold-store suitability or a guaranteed operating temperature.
Blue Enclosed-Cabin Forklift Gallery
|
|
Detailed Technical Specifications
| Specification | CPD25 |
|---|---|
| Model | CPD25 |
| Power type | Electric |
| Operation type | Seated |
| Rated load capacity | 2,500 kg |
| Load center | 500 mm |
| Wheelbase | 1,780 mm |
| Truck weight including battery | 3,200 kg |
| Tire type (drive / steer) | Solid tires |
| Drive tire size | 650-10 |
| Steering tire size | 18×7-8 |
| Mast tilt, forward / backward | 5° / 9° |
| Lowered mast height (h1) | 2,180 mm |
| Standard maximum lift height (h3) | 3,000 mm |
| Mast height at maximum lift (h4) | 3,892 mm |
| Overall length including forks (L1) | 3,770 mm |
| Length excluding forks (L2) | 2,550 mm |
| Overall width (b1/b2) | 1,200 mm |
| Fork size, thickness × width × length | 40 × 122 × 1070 mm |
| Ground clearance (M1) | 175 mm |
| Aisle width: pallet 1200 mm wide × 1000 mm long | 3,800 mm |
| Aisle width: pallet 800 mm wide × 1200 mm long | 4,000 mm |
| Turning radius (Wa) | 2,400 mm |
| Travel speed, laden / unladen | 11 / 12 km/h |
| Lifting speed, laden / unladen | 0.26 / 0.32 m/s |
| Lowering speed, laden / unladen | 0.38 / 0.36 m/s |
| Maximum gradeability, laden / unladen | 15% / 15% |
| Service brake | Hydraulic + mechanical |
| Parking brake | Mechanical |
| Drive motor rated power (S2 60 min) | 7.5 kW |
| Lifting motor rated power (S3 15%) | 8 kW |
| Drive control | Alternating current (AC) |
| Controller | Santroll |
| Main component waterproof interfaces | IPX4 |
The figures above are retained from the standard CPD25 source page as requested. Confirm final cabin-equipped weight, overall height and clearance requirements before ordering. The IPX4 entry concerns the stated component interfaces; it is not a weatherproof certification for the complete cabin.
Retained Base-Platform Component Details
The source-page operator, hydraulic, cylinder, battery and charger details are retained as base-platform references. Photos of standard open-cab complete trucks have been replaced with the supplied enclosed-cabin views.
![]() | Hydraulic SystemReference hydraulic layout for lifting and load handling. Confirm the final supplied configuration. |
![]() | Tilt CylinderReference mast-tilt cylinder and connection details. The published mast tilt is 5° forward and 9° backward. |
![]() | Battery CompartmentReference battery installation. Battery chemistry, capacity and charging arrangement are confirmed separately for the ordered truck. |
![]() | ChargerReference charging equipment. Match charger specification and local power supply to the selected battery. |
Component Overview

Reference views of the hydraulic system, tilt cylinder, display, seat, controls and mast. Final equipment depends on the agreed configuration.
Battery & Charging Options

Battery type and charger can be reviewed against your work schedule. Charging time and runtime shown in the illustration are indicative and depend on battery capacity, charger, duty cycle and operating conditions.
Attachment Options

Discuss side shifting, fork positioning and load-specific clamps. Check attachment compatibility and residual capacity at the required load centre and lift height.
OEM & ODM — Build Your Brand with EIOUU
OEM — Private-Label SupplyCustomize your logo, body colour, nameplate, labels and export packaging. Agree the artwork, colour reference and brand placement before production. | ODM — Application ConfigurationReview cabin options, mast, forks, battery, charger and attachments for your market. Technical feasibility, specification, cost and lead time are confirmed for the individual project. |
Upgrade to a More Sheltered Driving PositionSend your required lift height, load details, working environment, cabin options, quantity and destination. Our team will help prepare a factory proposal. |








